Rigol DSG3000 Series Bedienungsanleitung PDF herunterladen

RF Signal Generator

Series

DSG3000

The highest frequency: 3 GHz/6 GHz

Amplitude accuracy: <0.5dB (typical)

Output amplitude range: -130 dBm to +13 dBm

High signal purity, phase noise: <-110dBc/Hz@20kHz (typical)

Standard 0.5ppm internal clock; 5ppb high stable clock for option

Standard AM/FM/ΦM analog modulation

Standard pulse modulation; on/off ratio up to 80dB;

pulse train generator for option

I/Q modulation and I/Q baseband output

All modulations support internal and external modulation modes

Standard 2U height design to save rack space;

rack mount kit is available

Standard USB/LAN/GPIB remote control interfaces;

support SCPI command set

Wear-free electronic attenuator design

Well-designed automatically  atness calibration function

(Cables, attenuators, ampli ers and so on) for test

system with power meter control

RIGOL TECHNOLOGIES, INC.

1 2 3 4 5 6 ... 11 12

Inhaltsverzeichnis

Seite 1 - RF Signal Generator

RF Signal GeneratorSeriesDSG3000 The highest frequency: 3 GHz/6 GHz Amplitude accuracy: <0.5dB (typical) Output amplitude range: -130 dBm to +13

Seite 2 - Main Functions

Inputs and OutputsI/Q Baseband Generator (Option IQ-DSG3000)Output impedance 50Ω (nom.)Output voltageSetting range 0.1Vp to 1.5VpResolution 1mVFreque

Seite 3 - Specications

General SpecicationsDisplayType TFT LCDResolution 480*272Size 4.3”Mass MemoryMass memory Flash non-volatile memory (internal); USB disk (not supplie

Seite 4 - Measured SSB phase noise

Ordering InformationNOTE: All instruments, accessories and options can be ordered from your local RIGOL distributors.Description Order NumberModelSig

Seite 5

FMΦMFMΦMDSG3000 Series RF Signal Generator1RIGOLDimensions: W × H × D = 364 mm × 112 mm × 420 mm; Weight: 6.4kg (without packaging)Preset/View/HelpSig

Seite 6

SpecicationsFrequencySpecifications are valid under the following conditions: the instrument in the calibration cycle is stored at least two hours a

Seite 7 - Modulation

NOTE: [1] Without IQ-DSG3000 option.Spectral Purity[1]Harmonics CW mode, 1MHz ≤ f ≤ 6GHz, level ≤+13dBm<-30dBcSub harmonicsCW modef ≤ 3GHz <-65d

Seite 8

LevelSetting RangeSpecication level range Setting rangeMaximum output level9kHz ≤ f <100kHz +7dBm +10dBm100kHz ≤ f <1MHz +13dBm +15dBm1MHz ≤f ≤

Seite 9 - VrmsQI 5.0

Carrier frequency(MHz)Carrier frequency(MHz)Carrier frequency(MHz) Carrier frequency(MHz)Measured +13dBm output level VS frequencyMeasured -60dBm outp

Seite 10 - Inputs and Outputs

Level SettingSetting timeALC state on, frequency xed,temperature range: 20℃ to 30℃≤ 5ms (typ.)Uninterrupted level setting rangeATT xed mode, ALC sta

Seite 11 - General Specications

NOTE: [1] External operating mode, measured at 100kHz deviation. [2] External operating mode, measured at 5rad deviation. [3

Seite 12 - Warranty

I/Q Modulation (Option IQ-DSG3000)Modulation source External, internalBandwidth.(RF)External modulationBaseband (I or Q) Up to 60MHz (nom.)RF (I + Q)