Rigol DM3062 Betriebsanweisung PDF herunterladen (Seite 70)

RIGOL

User‟s Guide for DM3000 Series

2-20

Auto Triggering

Auto triggering takes continuous measurement at the highest sample rate for the

specified measurement configuration (function, range, resolution, and so forth).

Auto trigger is the default trigger mode at system power up.

Press  Auto, the display shows:

Figure 2- 19

Table 2- 16 Auto Trigger Function Menu Description

Interval time:

The delay between the trigger signal and the first sample taken. This is useful in

applications when the input signal settles before taking a reading, or for pacing a

burst of readings.

 The trigger delay may be set from 400 to 2000 ms.*

 The continuity and diode test functions ignore the trigger delay.

 The default trigger delay automatically set if no specified value entered.

 If a trigger delay entered, it will is used for all measurement functions (except

continuity and diode test).

*NOTE:

The trigger interval time is 400~2000ms (6 1/2), 200~2000ms (5 1/2) and

100~2000ms (4 1/2). The range of the interval time will be different in different

resolving index.

Function

Setting

Description

Interval

Set interval time in 400~2000ms.*

Hold

ON/OFF

Set turn the Reading Hold function ON or OFF.

Save all changes, back to a higher level menu.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 157 158

Keine Kommentare

Rigol DM3062 Betriebsanweisung Seite 70