
2
Specifications
All specifications apply to DS1000E, DS1000D Series Oscilloscopes unless where noted. To come up to
these specifications, two conditions must be met firstly:
The instrument must have been operated continuously for 30 minutes under the specified
operating temperature.
Do perform Self-Calibration operation through the Utility menu if the range of operating
temperature variations up to or more than 5°C.
NOTE: All specifications are guaranteed unless where marked “typical”.
Specifications
The waveform will be displayed one time while all the channels finish N
times Sample, N could be selectable from 2, 4, 8, 16, 32, 64, 128 and 256
1MΩ± 2%, the input capacity is 18pF± 3pF
Probe Attenuation Factors
1X, 5X, 10X, 50X, 100X, 500X,1000X
400V (DC+AC Peak, 1MΩ input impedance)
Time Delay between Channel (typical)
Real-Time: 13.65Sa/s-1GSa/s
Equivalent: 13.65Sa/s-25GSa/s
Memory Depth
(long memory)
Scanning Speed Range
(Sec/div)
2ns/div~50s/div, DS1102X
5ns/div~50s/div, DS1052X
1-2-5 Sequence
Sample Rate and Delay
Time Accuracy
± 50ppm (any interval ≥1ms)
Delta Time
Measurement Accuracy
(Full Bandwidth)
Single: ± (1 Sample interval + 50ppm × reading + 0.6 ns)
>16 averages: ± (1Sample interval + 50ppm × reading + 0.4 ns)
Kommentare zu diesen Handbüchern