Rigol DM3068 Betriebsanweisung PDF herunterladen (Seite 154)

RIGOL Chapter 6 Specifications

User’s Guide for DM3068

6-8

10.00000 A

[6]

3 Hz-5 Hz

1.10 + 0.08

1.10 + 0.10

0.100 + 0.008

5 Hz-10 Hz

0.35 + 0.08

0.35 + 0.10

0.035 + 0.008

10 Hz-5 kHz

0.15 + 0.08

0.15 + 0.10

0.015 + 0.008

Additional Low Frequency Errors (% of reading) Additional Crest Factor Errors (non-sine wave)

[7]

Frequency AC Filter Crest Factor Error (% of reading)

Slow Medium Fast

10 Hz-20 Hz 0 0.74 -- 1 - 2 0.05

20 Hz-40 Hz 0 0.22 -- 2 - 3 0.2

40 Hz-100 Hz 0 0.06 0.73 3 - 4 0.4

100 Hz- 200 Hz 0 0.01 0.22 4 - 5 0.5

200 Hz-1 kHz 0 0 0.18

>1 kHz 0 0 0

[1]

Specifications are for 90-minute warm-up, slow ac filter and sinewave input.

[2]

10% overrange on all ranges except ACV 750 V and ACI 10 A ranges.

[3]

Relative to calibration standards.

[4] Specifications are for sinewave input >5% of range. For inputs from 1% to 5% of range and <50 kHz, add 0.1% of range additional error. For 50 kHz

to 100 kHz, add 0.13% of range.

[5]

ACV 750 range limited to 8x10

Volt-Hz. When the input exceeds 300 V rms, add 0.7 mV error for each additional volt.

[6]

For continuous current > DC 7A or AC 7A rms, 30 seconds ON and 30 seconds OFF.

[7]

When the frequency is lower than 100 Hz, the specification of slow filter is only for sine wave input.

[8] Specifications are for sinewave input >5% of range. For inputs from 1% to 5% of range, add 0.1% of range additional error. Specifications are typical

values for 200 uA, 2 mA, 2 A and 10 A ranges when frequency is >1 kHz.

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 170 171

Kommentare zu diesen Handbüchern

Keine Kommentare

Rigol DM3068 Betriebsanweisung Seite 154

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multimeter Rigol DM3068