Rigol DM3064 Betriebsanweisung PDF herunterladen (Seite 146)

RIGOL

User’s Guide for DM3000 Series

5-12

[1] Specifications are for 60 minute warm–up and select resolving index to 5 3/4 and calibration temperature

18 ℃ – 28 ℃.

[2] 20% over range on all ranges, except DCV 1000V, ACV 750V, DCI and ACI 10A range.

[3] Specifications are for 4–wire resistance function, or 2–wire resistance using Math Null. Without Math Null,

add 0.2 Ω additional errors in 2–wire resistance function.

[4] For each additional volt over ± 500 VDC add 0.02 mV of error.

[5] For current terminal, > 7A DC or ACRMS for 30 seconds ON and 30 seconds OFF.

[6] Accuracy specifications are for the voltage measured at the input terminals only. 1 mA test current is

typical.

Variation in the current source will create some variation in the voltage drop across a diode junction.

Settling Considerations

Reading settling times are affected by source impedance, cable dielectric characteristics, and input signal

changes. Typically, settling time <1.5s when source impedance less than 1kΩ.

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 157 158

Keine Kommentare

Rigol DM3064 Betriebsanweisung Seite 146