Rigol DM3058 Betriebsanweisung PDF herunterladen (Seite 113)

RIGOL

User’s Guide for DM3058

4-1

Chapter 4 Troubleshooting

1. When pressing the power switch, the multimeter is still in blank

screen with nothing displaying:

(1) Check if the power is correctly connected.

(2) Check if the main power switch on the rear panel has been turn on.

(3) Check if the safety fuse has been blown, replace with a new one if necessary.

(4) Having done with the above steps, restart the instrument.

(5) If it still cannot work properly, please contact the local RIGOL Support center,

let’s serve for you.

2. When connecting a current signal, the reading has any change:

(1) Check if the test lead is correctly connected to current jack or the LO jack.

(2) Check if the safety fuse in the current location on the rear panel has been

blown.

(3) Check if the measure location has switched to the DCI or ACI place correctly.

(4) Check whether the input is ACI but the shelves location is DCI.

3. When connecting a DC power signal, the reading display is

abnormality:

(1) Check if the test lead is correctly connected with the current jack or the LO

jack.

(2) Check if the safety fuse in the current location on the rear panel has been

blown.

(3) Check the measure location has switched to the DCI or DCV place correctly.

(4) Check whether the input is DCI but the shelves location is ACI.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 131 132

Keine Kommentare

Rigol DM3058 Betriebsanweisung Seite 113