Rigol DM3068 Betriebsanweisung PDF herunterladen (Seite 135)

Chapter 3 Remote Control RIGOL

User’s Guide for DM3068

3-11

Remote Control via GPIB

1. Connect the Instrument

Connect the multimeter to PC using GPIB cable.

2. Configure GPIB Address

Select GPIB interface and configure its address according to “Interface

Configurations” in chapter 2.

3. Search RS232 Devices

Turn on the Ultra Sigma and click

to enter the communication

setting interface as shown in the figure below. Click “Search” and the software

will search the GPIB instrument resources connected to the PC. The device

resources will be displayed on the right side of the panel.

If resources can not be found automatically:

 Select the GPIB card address of the PC from the comboBox of “GPIB::”

and select the GPIB address set in the instrument from the comboBox of

“::INSTR”.

 Click “Test” to check whether the GPIB communication works normally; if

not, please follow the corresponding prompt messages to solve the

problem.

4. View GPIB Device

Click “OK” and the software return to its main interface. The searched

instruments are shown under the “RIGOL Online Resource” directory, as

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 170 171

Keine Kommentare

Rigol DM3068 Betriebsanweisung Seite 135