Rigol DM3068 Betriebsanweisung PDF herunterladen (Seite 59)

Chapter 2 Front Panel Operations RIGOL

User’s Guide for DM3068

2-17

To Measure Capacitance

Range: 2 nF, 20 nF, 200 nF, 2 μF, 20 μF , 200 μF, 2 mF, 20 mF, 100 mF

Max Resolution: 1 pF (in 2 nF range)

Input Protection: a 1000 V input protection is available in all ranges. 10%

overrange is available on all ranges.

Operating Steps:

1. Enable the CAP measurement

Press

at the front panel to enter the following interface.

2. Make connection

Connect the test lead with the measured capacitance by referring to

“Measurement Connections”.

Tip

Please short contact the two feet of an electrolytic capacitor by using a test

lead before measuring the electrolytic capacitor.

3. Set the range

Specify an appropriate range (the resolution is fixed at 3

digits) according to

the measured signal and measurement requirements.

4. Read the measurement value

The multimeter measures the measured capacitance according to the current

measurement settings and displays the value on the screen.

5. Make math operation (advanced)

Users can perform math operation (STA, P/F, and REL) on each CAP

measurement reading. For REL operation, the multimeter subtracts the

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 170 171

Keine Kommentare

Rigol DM3068 Betriebsanweisung Seite 59