Rigol M300 Bedienungsanleitung PDF herunterladen (Seite 59)

Chapter 2 Command System RIGOL

Programming Guide for DM3000

2-47

1. :DATAlog:CONFigure?

Syntax

:DATAlog:CONFigure?

Function The query returns the configuration information of the current data

acquisition task, including the measurement function, range and

resolution (separated by commas “,”), for example, DCV,0,2.

Explanation  The Datalog function must be enabled (can only be enabled

under DCV, DCI, 2WR and 4WR measurement functions) before

sending this command.

 The returnd measurement function should be DCV, DCI, RES or

FRES.

 For the definition of the range in the return value, please refer to

the “Explanation” in :MEASure command set.

:DATAlog:CONFigure:FUNCtion

Syntax :DATAlog:CONFigure:FUNCtion?

:DATAlog:CONFigure:FUNCtion

{<DCV|DCI|RESistance|FRESistance>,<range>}

Function Set the measurement function that needs to acquire data and its

range.

Explanation The lower limit of

<range>

is 0. The upper limit is related to the

measurement function:

DCV and DCI: 4;

RESistance and FRESistance: 6.

Example Set the DC voltage measurement function and select 20 V range:

:DATAlog:CONFigure:FUNCtion DCV,2

The query returns DCV,2.

:DATAlog:CONFigure:STARtmode?

Syntax :DATAlog:CONFigure:STARtmode?

Function Query the current start mode (auto or external) of the Datalog

function. The query returns AUTO or EXTERN.

:DATAlog:CONFigure:STARtmode:AUTO

Syntax :DATAlog:CONFigure:STARtmode:AUTO

Function

Set the start mode of the current Datalog function to Auto.

:DATAlog:CONFigure:STARtmode:EXTern

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 88 89

Keine Kommentare

Rigol M300 Bedienungsanleitung Seite 59