Rigol M300 Bedienungsanleitung PDF herunterladen (Seite 64)

RIGOL Chapter 2 Command System

Programming Guide for DM3000

2-52

1. :SCAN:PROJect?

Syntax :SCAN:PROJect?

Function Query the name of the scan project currently created. When there is

no scan project, the query returns NULL.

:SCAN:PROJect:CREAte

Syntax :SCAN:PROJect:CREAte?

:SCAN:PROJect:CREAte

<name>

Function Create a scan project with the specified name.

Query whether a task has been created for the current scan project.

The query returns True if an available task exists; otherwise, returns

False.

Explanation

<name>

should be composed of letters a - z, A - Z and numbers

within 0 and 9 and its length can not exceed 15 characters.

:SCAN:PROJect:CURRently:CYCLe?

Syntax :SCAN:PROJect:CURRently:CYCLe?

Function Query the number of cycles of the current scan project.

The query returns an integer.

Explanation Refer to :SCAN:RUN to set the number of cycles and run the scan

project.

:SCAN:TASK:ADD

Syntax :SCAN:TASK:ADD{<TaskNum>,<Channel>,<Function>,<Range>,

<Resolution>,<SalmpleNum>,<Delay>}

Function

Add a task to the current scan project.

Explanation  <TaskNum>: the task number and itsrange is from 0 to 99.

If the tasks previous to this task are not added, the multimeter

will automatically add these tasks using the current

configurations.

 <Channel>: the scan channel currently used by this task and its

range is from 1 to 16. Wherein, for DCV, ACV, 2WR, FREQ, PERI,

CAP and DIODE, channel 1 to channel 12 can be used; while, for

DCI and ACI, channel 13 to channel 16 can be used.

 <Function>: the measurement function currently used by this

task and it can be

DCV|ACV|DCI|ACI|RESistance|DIODe|CAPacitance|PERIod|FRE

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 88 89

Keine Kommentare

Rigol M300 Bedienungsanleitung Seite 64