Rigol DM3064 Spezifikationen PDF herunterladen (Seite 82)

RIGOL Chapter 3 Commands Compatibility

Programming Guide for DM3000

3-16

HOLDCLR

Exits the Touch Hold function and restores the meter into normal

working.

HOLDTHRESH <threshold>

Sets the measurement threshold for HOLD.

HOLDTHRESH?

Queries the measurement threshold for HOLD.

MAX

Causes the meter to enter MAX modifier with present reading as

maximum value.

MAXSET <numeric value>

Causes the meter to enter MAX modifier with <numeric value> as

maximum value.

MIN

Causes the meter to enter MIN modifier with present reading as

minimum value.

MINSET <numeric value>

Causes the meter to enter MIN modifier with <numeric value> as

minimum value.

MMCLR

Exits the MIN MAX modifier. The stored minimum and maximum

values are lost.

MOD?

Queries the numeric value indicating modifiers in use. 1 = MIN, 2 =

MAX, 4 = HOLD, 8 = dB, 32 = REL, 64 = COMP.

If multiple modifiers are selected, the value returned is equal to the

sum of the values of the selected modifiers. If none of the modifiers

are selected, the query returns "0".

REL

Causes the meter to enter the relative (REL) modifier, using the

value shown on the primary display as the relative base.

RELCLR

Exits the relative (REL) modifier and returns to the ranging mode.

RELSET <relative base>

Causes the meter to enter the relative (REL) modifier, using

<relative base> as the relative base.

RELSET?

Queries the relative base used by meter.

AUTO

Causes the meter to enter the automatic range mode on the primary

display.

AUTO?

Queries if the meter is in automatic range mode.

FIXED

Causes the meter to exit automatic range on the primary display and

enter manual ranging. The present range becomes the selected

range.

RANGE <value range>

Sets the desired range for the current measurement function.

RANGE1?

Queries the range of the measurement function used currently.

RATE <speed>

Sets the measurement speed. <speed> can be “S, M or F”, which

corresponds to three measurement resolutions. <speed> is either

"F" (33 readings/second), "M" (5 readings/second), or "S" (2.5

readings/second).

1 2 ... 77 78 79 80 81 82 83 84 85 86 87

Kommentare zu diesen Handbüchern

Keine Kommentare

Rigol DM3064 Spezifikationen Seite 82

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multimeter Rigol DM3064