RIGOL Programming Guide DM3058/DM3058E Digital Multimeter Aug. 2012 RIGOL Technologies, Inc.
RIGOL Programming Guide for DM3058/DM3058E 1-5 Commands in this Manual To meet the needs from different users, DM3058/DM3058E provides three command
RIGOL Programming Guide for DM3058/DM3058E 4-7 7. CALCulate:NULL:OFFSet Command Format: CALCulate:NULL:OFFS
RIGOL Programming Guide for DM3058/DM3058E 4-8 Note the average value could be read any time. Return Format: The query returns the average of all
RIGOL Programming Guide for DM3058/DM3058E 4-9 11. CALCulate:AVERage:MINimum? Command Format: CALCulate:AVE
RIGOL Programming Guide for DM3058/DM3058E 4-10 CONFigure Commands The commands set the basic measurement functions and related parameters, such
RIGOL Programming Guide for DM3058/DM3058E 4-11 1. CONFigure:VOLTage:DC Command Format: CONFigure:VOLTage:D
RIGOL Programming Guide for DM3058/DM3058E 4-12 The command presets the multimeter as specified range and resolution for AC voltage measurement, b
RIGOL Programming Guide for DM3058/DM3058E 4-13 4. CONFigure:CURRent:AC Command Format: CONFigure:CURRent:A
RIGOL Programming Guide for DM3058/DM3058E 4-14 Explanations: The unit is Ω. For <range>: MIN = 200; MAX = 100 000 000, DEF=AUTO. <res
RIGOL Programming Guide for DM3058/DM3058E 4-15 frequency measurement, but does not start the measurement.
RIGOL Programming Guide for DM3058/DM3058E 4-16 9. CONFigure:CONTinuity Command Format: CONFigure:CONTinuity Function: The command presets the m
RIGOL Programming Guide for DM3058/DM3058E 2-2 Chapter 2 General Commands The system applies to both DM3058/DM3058E commands and other compatibl
RIGOL Programming Guide for DM3058/DM3058E 4-17 DATA Commands The commands access the data from non-volatil
RIGOL Programming Guide for DM3058/DM3058E 4-18 1. DATA:FEED RDG_STORE, {"CALCulate"|""} Command Format: DATA:FEED RDG_STORE,
RIGOL Programming Guide for DM3058/DM3058E 4-19 DISPlay Commands The commands control the screen, including
RIGOL Programming Guide for DM3058/DM3058E 4-20 FETCh? Commands 1. FETCh? Command Format: FETCh? Function: The command transfers the readings s
RIGOL Programming Guide for DM3058/DM3058E 4-21 INITiate Commands 1. INITiate Command Format: INITiate Fu
RIGOL Programming Guide for DM3058/DM3058E 4-22 INPut Commands 1. INPut:IMPedance Command Format: INPut:IMPedance:AUTO {OFF|ON} INPut:IMPedanc
RIGOL Programming Guide for DM3058/DM3058E 4-23 MEASure Commands Presets the multimeter as specified range
RIGOL Programming Guide for DM3058/DM3058E 4-24 1. MEASure:VOLTage:DC? Command Format: MEASure:VOLTage:DC? {<range>|MIN|MAX|DEF},{<reso
RIGOL Programming Guide for DM3058/DM3058E 4-25 The command presets the multimeter as specified range and
RIGOL Programming Guide for DM3058/DM3058E 4-26 6. MEASure:FRESistance? Command Format: MEASure:FRESistance? {<range>|MIN|MAX|DEF},{<re
RIGOL Programming Guide for DM3058/DM3058E 2-3 IEEE 488 Commands The commands query the basic equipment imformation or perform some common actions, w
RIGOL Programming Guide for DM3058/DM3058E 4-27 measurement, and then sends the readings to the output buffe
RIGOL Programming Guide for DM3058/DM3058E 4-28 READ? Commands 1. READ? Command Format: READ? Function: The command switches the trigger state
RIGOL Programming Guide for DM3058/DM3058E 4-29 ROUTe Commands 1. ROUTe:TERMinals? Command Format: ROUTe:
RIGOL Programming Guide for DM3058/DM3058E 4-30 SENSe Commands The commands set the measurement parameters such as measurement function, range, p
RIGOL Programming Guide for DM3058/DM3058E 4-31 1. [SENSe:]FUNCtion Command Format: [SENSe:]FUNCtion "
RIGOL Programming Guide for DM3058/DM3058E 4-32 The commands set and query the range of DC voltage measurement. Parameter: Name Type Range
RIGOL Programming Guide for DM3058/DM3058E 4-33 [SENSe:]VOLTage:AC:RANGe? [MINimum|MAXimum] – Queries the ra
RIGOL Programming Guide for DM3058/DM3058E 4-34 Function: The commands set and query the range of AC current measurement. Parameter: Name Type
RIGOL Programming Guide for DM3058/DM3058E 4-35 [SENSe:]RESistance:RANGe? [MINimum|MAXimum] – Queries the cu
RIGOL Programming Guide for DM3058/DM3058E 4-36 8. [SENSe:]FREQuency:VOLTage:RANGe Command Format: [SENSe:]FREQuency:VOLTage:RANGe {<range&g
RIGOL Programming Guide for DM3058/DM3058E 2-4 1. *CLS Command Format: *CLS Function: The command resets the values in all Event Registers and c
RIGOL Programming Guide for DM3058/DM3058E 4-37 Parameter: Name Type Range Default <range> Dis
RIGOL Programming Guide for DM3058/DM3058E 4-38 11. [SENSe:]VOLTage:AC:RANGe:AUTO Command Format: [SENSe:]VOLTage:AC:RANGe:AUTO {ON|OFF} [SENSe:]V
RIGOL Programming Guide for DM3058/DM3058E 4-39 13. [SENSe:]CURRent:AC:RANGe:AUTO Command Format: [SENSe:]CU
RIGOL Programming Guide for DM3058/DM3058E 4-40 Return Format: The query returns the auto range state of 2-wire resistance measurement. 15. [S
RIGOL Programming Guide for DM3058/DM3058E 4-41 [SENSe:]FREQuency:VOLTage:RANGe:AUTO {ON|OFF} - Sets the des
RIGOL Programming Guide for DM3058/DM3058E 4-42 Function: The commands set and query the precision of DC voltage measurement. Parameter: Name
RIGOL Programming Guide for DM3058/DM3058E 4-43 4-2. Return Format: The query returns the current precisi
RIGOL Programming Guide for DM3058/DM3058E 4-44 Parameter: Name Type Range Default <resolution> Discrete Refer to Table 4-2 1ppm x
RIGOL Programming Guide for DM3058/DM3058E 4-45 setting of resistance. Return Format: The query returns the
RIGOL Programming Guide for DM3058/DM3058E 4-46 Function: The commands set and query the integration time for DC voltage measurement. The inputted
RIGOL Programming Guide for DM3058/DM3058E 2-5 4. *IDN? Command Format: *IDN? Function: The command queries the equipment ID. Return Format: The qu
RIGOL Programming Guide for DM3058/DM3058E 4-47 26. [SENSe:]RESistance:NPLC Command Format: [SENSe:]RESistan
RIGOL Programming Guide for DM3058/DM3058E 4-48 PLC. [SENSe:]FRESistance:NPLC? [MINimum|MAXimum] – Queries the integration time of 4-wire resis
RIGOL Programming Guide for DM3058/DM3058E 4-49 Function: The commands set and query the aperture time of pe
RIGOL Programming Guide for DM3058/DM3058E 4-50 31. [SENSe:]ZERO:AUTO Command Format: [SENSe:]ZERO:AUTO {OFF|ONCE|ON} [SENSe:]ZERO:AUTO? Function
RIGOL Programming Guide for DM3058/DM3058E 4-51 SAMPle Commands 1. SAMPle:COUNt Command Format: SAMPle:COU
RIGOL Programming Guide for DM3058/DM3058E 4-52 TRIGger Commands The commands set the trigger parameters such as trigger times, delay time and ot
RIGOL Programming Guide for DM3058/DM3058E 4-53 1. TRIGger:COUNt Command Format: TRIGger:COUNt {<value&g
RIGOL Programming Guide for DM3058/DM3058E 4-54 TRIGger:DELay {<seconds>|MINimum|MAXimum} - Sets the desired delay time TRIGger:DELay? [MINi
RIGOL Programming Guide for DM3058/DM3058E 4-55 TRIGger:SOURce? – Queries the current trigger source. The p
RIGOL Programming Guide for DM3058/DM3058E 2-6 thereinto, “*PSC 0” indicates disable - the enable value of each register would be LAST STATE; “*PS
RIGOL Programming Guide for DM3058/DM3058E 5-1 Chapter 5 Compatible Fluke Commands In this system, all the parameters and the returned formats are
RIGOL Programming Guide for DM3058/DM3058E 5-2 Function Commands The commands enable the basic measurement funtions of the instrument, which ar
RIGOL Programming Guide for DM3058/DM3058E 5-3 1. AAC Command Format: AAC AAC2 Function: The commands enab
RIGOL Programming Guide for DM3058/DM3058E 5-4 4. CONT Command Format: CONT Function: The command enables the Continuity test of main display.
RIGOL Programming Guide for DM3058/DM3058E 5-5 The command queries the identifiers of selected function on t
RIGOL Programming Guide for DM3058/DM3058E 5-6 Explanations: VAC - Enables the AC voltage measurement function of main display. VAC2 - Enables th
RIGOL Programming Guide for DM3058/DM3058E 5-7 Function Regulation Commands The commands enable the regul
RIGOL Programming Guide for DM3058/DM3058E 5-8 1. DB Command Format: DB Function: The command enables dB operation. Explanations: The unit of t
RIGOL Programming Guide for DM3058/DM3058E 5-9 Table 5-1 Reference impedance Parameter Reference impedance
RIGOL Programming Guide for DM3058/DM3058E 5-10 The command enables the multimeter exit Touch Hold mode and back to its normal state. 6. HOLDTH
RIGOL Programming Guide for DM3058/DM3058E 2-7 *STB? Function: The command queries the condition value of Status Byte Register (STB). Return Format:
RIGOL Programming Guide for DM3058/DM3058E 5-11 8. MAXSET Command Format: MAXSET <numeric value> Fun
RIGOL Programming Guide for DM3058/DM3058E 5-12 Explanations: <numeric value> could be a signed integer, a signed real number without expone
RIGOL Programming Guide for DM3058/DM3058E 5-13 13. REL Command Format: REL Function: The command enables
RIGOL Programming Guide for DM3058/DM3058E 5-14 Range and Rate Commands The commands set and query the measuring range and the speed, which are
RIGOL Programming Guide for DM3058/DM3058E 5-15 1. AUTO Command Format: AUTO AUTO? Function: The commands
RIGOL Programming Guide for DM3058/DM3058E 5-16 on) currently used. RANGE1? – Queries the current range selected by main display. RANGE2? – Queri
RIGOL Programming Guide for DM3058/DM3058E 5-17 Measurement Commands The commands query the measured resul
RIGOL Programming Guide for DM3058/DM3058E 5-18 1. MEAS Command Format: MEAS? MEAS1? MEAS2? Function: MEAS? - Queries the measured value of the
RIGOL Programming Guide for DM3058/DM3058E 5-19 Compare Commands The subcommands campare if the value measu
RIGOL Programming Guide for DM3058/DM3058E 5-20 1. COMP Command Format: COMP COMP? Function: COMP – Enables the multimeter enter COMP mode, the
RIGOL Programming Guide for DM3058/DM3058E 2-8 STATus Commands The commands set and query both the Questionable Status Register and Operation S
RIGOL Programming Guide for DM3058/DM3058E 5-21 4. COMPLO Command Format: COMPLO <low value> Functio
RIGOL Programming Guide for DM3058/DM3058E 5-22 Trigger Commands 1. TRIGGER Command Format: TRIGGER <type> TRIGGER? Function: The
RIGOL Programming Guide for DM3058/DM3058E 5-23 Format Commands 1. FORMAT Command Format: FORMAT <frmt&
RIGOL Programming Guide for DM3058/DM3058E 5-24 Reading Commands 1. SERIAL? Command Format: SERIAL? Function: The command reads the serial numb
RIGOL Programming Guide for DM3058/DM3058E 6-1 Chapter 6 Application Examples This chapter gives some measu
RIGOL Programming Guide for DM3058/DM3058E 6-2 Example 1: Reading Statistic Purpose: To implement the maximum statistic through commands. When th
RIGOL Programming Guide for DM3058/DM3058E 6-3 The programming implementations——Agilent Commands 0 cmdset
RIGOL Programming Guide for DM3058/DM3058E 6-4 Example 2: Eliminating the Impedance Errors on Test leads Purpose: To eliminate the impedance erro
RIGOL Programming Guide for DM3058/DM3058E 6-5 magnitude comparing with the result in line 9 after the REL o
RIGOL Programming Guide for DM3058/DM3058E 6-6 The programming implementations——Agilent Commands 0 cmdset agilent /* Select Agilent comm
RIGOL Programming Guide for DM3058/DM3058E 2-9 Figure 2-1 The Status Register diagram 1. STATus:OPERation:CONDition?
RIGOL Programming Guide for DM3058/DM3058E 6-7 Example 3: dBm Measurement Purpose: Execute the dBm measurem
RIGOL Programming Guide for DM3058/DM3058E 6-8 The programming implementations——Agilent Commands 0 *cls /* Clear the instrument stat
RIGOL Programming Guide for DM3058/DM3058E 6-9 Example 4: dB Measurement Purpose: Use commands to perform d
RIGOL Programming Guide for DM3058/DM3058E 6-10 not corresponding query command. 2. The return value of command in line 8 is “dB reference value
RIGOL Programming Guide for DM3058/DM3058E 6-11 Example 5: P/F Testing Purpose: Use commands to perform a P
RIGOL Programming Guide for DM3058/DM3058E 6-12 The programming implementations——Agilent Commands 0 *CLS /* Clear the instrument sta
RIGOL Programming Guide for DM3058/DM3058E 6-13 Example 6: Reading Hold “Reading Hold” function can get a s
RIGOL Programming Guide for DM3058/DM3058E 6-14 Example 7: Querying the Status Register The status register provided enables user to diagnose the
RIGOL Programming Guide for DM3058/DM3058E 6-15 operation status register */ 21 Return 256 22 *ESR?
RIGOL Programming Guide for DM3058/DM3058E 6-16 56 Return 288 /* change status, execute the single trigger once and enter “wait to trigger
RIGOL Programming Guide for DM3058/DM3058E 2-10 Command Format: STATus:OPERation:CONDition? Function: The command queries the status of Condition
RIGOL Programming Guide for DM3058/DM3058E 6-17 Example 8: Querying the Error Information The status regist
RIGOL Programming Guide for DM3058/DM3058E 6-18 25 Return 4 26 *cls 27 :function:diode 28 :calculate:statistic:min? /*Beeping*/ 29
RIGOL Programming Guide for DM3058/DM3058E 1 Appendix Incompatible Agilent Commands MEASure:VOLTage:DC:RATio
RIGOL Programming Guide for DM3058/DM3058E I Copyright Information © 2008 RIGOL Technologies, Inc. All Rights Reserved. RIGOL products are pro
RIGOL Programming Guide for DM3058/DM3058E 2-11 Function: The command queries the value of Event Register in the Operation Status Register queue. Re
RIGOL Programming Guide for DM3058/DM3058E 2-12 Function: The commands set and query the value of Enable Register in the Questionable Status queue
RIGOL Programming Guide for DM3058/DM3058E 2-13 SYSTem Commands The commands query and set the beeper, error messages and SCPI edition, which mainly
RIGOL Programming Guide for DM3058/DM3058E 2-14 1. SYSTem:BEEPer Command Format: SYSTem:BEEPer Function: The command tests the beeper. Explanat
RIGOL Programming Guide for DM3058/DM3058E 2-15 3. SYSTem:ERRor? Command Format: SYSTem:ERRor? Function: The command queries the errors in the Erro
RIGOL Programming Guide for DM3058/DM3058E 3-1 Chapter 3 RIGOL Command System All the RIGOL commands in connection with the return values are ASCII
RIGOL Programming Guide for DM3058/DM3058E 3-2 :CALCulate Commands The commands set the parameters relate to math operations, which mainly includ
RIGOL Programming Guide for DM3058/DM3058E 3-3 1. :CALCulate:FUNCtion Command Format: :CALCulate:FUNCtion? :CALCulate:FUNCtion {NONE|REL|DB|DBM|MIN|M
RIGOL Programming Guide for DM3058/DM3058E 3-4 2. :CALCulate:STATistic:MIN? Command Format: :CALCulate:STATistic:MIN? Function: The command quer
RIGOL Programming Guide for DM3058/DM3058E II Summary This manual provides the guidance for remote control programming of DM3058/DM3058E digital
RIGOL Programming Guide for DM3058/DM3058E 3-5 The command is valid only when AVERAGE operation is enabled. Return Format: The query returns the calc
RIGOL Programming Guide for DM3058/DM3058E 3-6 Turn off the statistic function. :CALCulate:STATistic:STATe OFF 7. :CALCulate:REL:OFFSet Command
RIGOL Programming Guide for DM3058/DM3058E 3-7 Return Format: The query returns the offset relates to REL operation. 8. :CALCulate:REL:STATe Comman
RIGOL Programming Guide for DM3058/DM3058E 3-8 10. :CALCulate:DB:REFErence Command Format: :CALCulate:DB:REFErence? :CALCulate:DB:REFErence {<r
RIGOL Programming Guide for DM3058/DM3058E 3-9 Return Format: The query returns the current dB state, ON (1) or OFF (0). Example: Turn off the dB ope
RIGOL Programming Guide for DM3058/DM3058E 3-10 :CALCulate:DBM:REFErence {<range>|MIN|MAX|DEF} – Sets the desired reference resistance o
RIGOL Programming Guide for DM3058/DM3058E 3-11 Explanations: When the measurement result is within the maximum and minimum, the PF operation is succe
RIGOL Programming Guide for DM3058/DM3058E 3-12 Return Format: The query returns the current lower limit. 17. :CALCulate:PF:UPPEr Command Forma
RIGOL Programming Guide for DM3058/DM3058E 3-13 :CALCulate:PF:STATe {ON|OFF|1|0} – Sets the desired P/F state. Return Format: The query returns the c
RIGOL Programming Guide for DM3058/DM3058E 3-14 :FUNCtion Commands The commands enable the measurement function to be used, which are equal to th
RIGOL Programming Guide for DM3058/DM3058E III Contents Chapter 1 Introduction ...
RIGOL Programming Guide for DM3058/DM3058E 3-15 1. :FUNCtion? Command Format: :FUNCtion? Function: The command queries the current measurement fun
RIGOL Programming Guide for DM3058/DM3058E 3-16 4. :FUNCtion:CURRent:DC Command Format: :FUNCtion:CURRent:DC Function: The command enables the D
RIGOL Programming Guide for DM3058/DM3058E 3-17 Function: The command enables the 4-wire resistance measurement. Explanations: The query :FUNCtion? w
RIGOL Programming Guide for DM3058/DM3058E 3-18 Explanations: The query :FUNCtion? will return CONT. 11. :FUNCtion:DIODe Command Format: :FUNCti
RIGOL Programming Guide for DM3058/DM3058E 3-19 :FUNCtion2 Commands The commands set and query the parameters relate to double-display function, whic
RIGOL Programming Guide for DM3058/DM3058E 3-20 1. :FUNCtion2? Command Format: :FUNCtion2? Function: The comand queries the current measurement
RIGOL Programming Guide for DM3058/DM3058E 3-21 Explanations: The command is valid only when vice-display is enabled. Return Format: The command retu
RIGOL Programming Guide for DM3058/DM3058E 3-22 Explanations: The available measurements to main-display could only be DCV, DCI, ACV, ACI after t
RIGOL Programming Guide for DM3058/DM3058E 3-23 Explanations: The available measurements to main-display could only be ACV, FREQUENCY, PERIOD after t
RIGOL Programming Guide for DM3058/DM3058E 3-24 Explanations: The available measurements to main-display could only be CAPACITANCE after this com
RIGOL Programming Guide for DM3058/DM3058E IV TRIGger Commands ... 4-
RIGOL Programming Guide for DM3058/DM3058E 3-25 :MEASure Commands The commands set the measurement parameters or query the measured results, includin
RIGOL Programming Guide for DM3058/DM3058E 3-26 :MEASure:CAPacitance? :MEASure:CAPacitance :MEASure:CAPacitance:RANGe?
RIGOL Programming Guide for DM3058/DM3058E 3-27 1. :MEASure? Command Format: :MEASure? Function: The command queries if a new data has been acquir
RIGOL Programming Guide for DM3058/DM3058E 3-28 The command returns the measured DC voltage value in scientific notation, such as: 8.492853e-05, t
RIGOL Programming Guide for DM3058/DM3058E 3-29 :MEASure:VOLTage:DC MIN or :MEASure:VOLTage:DC 0 5. :MEASure:VOLTage:DC:RANGe? Command Format: :MEA
RIGOL Programming Guide for DM3058/DM3058E 3-30 :MEASure:VOLTage:DC:IMPEdance 10G 7. :MEASure:VOLTage:DC:FILTer[:STATe] Command Format: :MEASur
RIGOL Programming Guide for DM3058/DM3058E 3-31 9. :MEASure:VOLTage:AC Command Format: :MEASure:VOLTage:AC {<range>|MIN|MAX|DEF} Function: Th
RIGOL Programming Guide for DM3058/DM3058E 3-32 The command queries the current range of AC voltage measurement. Return Format: The query returns:
RIGOL Programming Guide for DM3058/DM3058E 3-33 Table 3-6 DC current range and the corresponding resolution Parameter Range Resolution 0 200 μA
RIGOL Programming Guide for DM3058/DM3058E 3-34 measurement. Explanations: :MEASure:CURRent:DC:FILTer[:STATe]? – Queries the filter state. :MEA
RIGOL Programming Guide for DM3058/DM3058E 1-1 Chapter 1 Introduction This chapter gives you an instruction in how to operate RIGOL DM3058/DM3058E
RIGOL Programming Guide for DM3058/DM3058E 3-35 <range> Discrete {0|1|2|3} 1 Explanations: :MEASure:CURRent:AC <value> - Sets the AC cu
RIGOL Programming Guide for DM3058/DM3058E 3-36 Command Format: :MEASure:RESistance? Function: The command queries the measured 2-wire resistance
RIGOL Programming Guide for DM3058/DM3058E 3-37 MAX 100 MΩ MIN 200 Ω DEF 200 kΩ Example: Sets the 2-wire resistance range to 200Ω. :MEASure:RESist
RIGOL Programming Guide for DM3058/DM3058E 3-38 :MEASure:FRESistance {<range>|MIN|MAX|DEF} Function: The command sets the desired 4-wire re
RIGOL Programming Guide for DM3058/DM3058E 3-39 Return Format: The command queries the measured frequency value of AC signal in scientific notation,
RIGOL Programming Guide for DM3058/DM3058E 3-40 Return Format: The query returns: 0, 1, 2, 3 or 4 (see Table 3-5). 27. :MEASure:PERiod? Comman
RIGOL Programming Guide for DM3058/DM3058E 3-41 29. :MEASure:PERiod:RANGe? Command Format: :MEASure:PERiod:RANGe? Function: The command queries t
RIGOL Programming Guide for DM3058/DM3058E 3-42 Name Type Range Default <range> Consecutive Integer 1 Ω~2000 Ω 10 Explanations: The pa
RIGOL Programming Guide for DM3058/DM3058E 3-43 Return Format: The query returns the measured capacitance value in scientific notation, such as: 8.889
RIGOL Programming Guide for DM3058/DM3058E 3-44 :MEASure:CAPacitance:RANGe? Function: The command queries the capacitance range. Return Format:
RIGOL Programming Guide for DM3058/DM3058E 1-2 Programming Introduction The programming system provides an easy way for remote control through co
RIGOL Programming Guide for DM3058/DM3058E 3-45 :RATE Commands The commands sets the desired rate of various measurment to such as Slow, Medium and F
RIGOL Programming Guide for DM3058/DM3058E 3-46 1. :RATE:VOLTage:DC Command Format: :RATE:VOLTage:DC? :RATE:VOLTage:DC {F|M|S} Function: The co
RIGOL Programming Guide for DM3058/DM3058E 3-47 :RATE:VOLTage:AC? - Queries the current measuring rate of AC voltage. The command is valid only when
RIGOL Programming Guide for DM3058/DM3058E 3-48 4. :RATE:CURRent:AC Command Format: :RATE:CURRent:AC? :RATE:CURRent:AC {F|M|S} Function: The com
RIGOL Programming Guide for DM3058/DM3058E 3-49 The query returns the parameter related to current 2-wire resistance rate (see Table 3-10). Example:
RIGOL Programming Guide for DM3058/DM3058E 3-50 The commands query and set the rate of sensor measurement. Explanations: :RATE:SENSor? - Querie
RIGOL Programming Guide for DM3058/DM3058E 3-51 :SYSTem Commands The commands set the desired system parameters, which mainly include: :SYSTem:CO
RIGOL Programming Guide for DM3058/DM3058E 3-52 1. :SYSTem:CONFigure:POWEron Command Format: :SYSTem:CONFigure:POWEron {LAST|DEF} Function: The
RIGOL Programming Guide for DM3058/DM3058E 3-53 4. :SYSTem:FORMat:DECImal Command Format: :SYSTem:FORMat:DECImal? :SYSTem:FORMat:DECImal {COMMA|DOT}
RIGOL Programming Guide for DM3058/DM3058E 3-54 6. :SYSTem:DISPlay:BRIGht Command Format: :SYSTem:DISPlay:BRIGht? :SYSTem:DISPlay:BRIGht <valu
RIGOL Programming Guide for DM3058/DM3058E 1-3 Symbol Instruction 1. Colon : Commands usually begin with a colon (:), which is used to separate the
RIGOL Programming Guide for DM3058/DM3058E 3-55 :SYSTem:DISPlay:CONTrast <value> - Sets the desired screen contrast within 0 and 32. Return For
RIGOL Programming Guide for DM3058/DM3058E 3-56 :TRIGger Commands The commands set the parameters relate to tigger system, which mainly include:
RIGOL Programming Guide for DM3058/DM3058E 3-57 1. :TRIGger:SOURce Command Format: :TRIGger:SOURce? :TRIGger:SOURce {AUTO|SINGLE|EXT} Function: The
RIGOL Programming Guide for DM3058/DM3058E 3-58 In Medium measurement, the default interval is 50 ms and the available range is within 50 ms and 2
RIGOL Programming Guide for DM3058/DM3058E 3-59 Explanations: :TRIGger:AUTO:HOLD:SENSitivity? – Queries the current delay sensitive of auto trigger. :
RIGOL Programming Guide for DM3058/DM3058E 3-60 6. :TRIGger:SINGle:TRIGgered Command Format: :TRIGger:SINGle:TRIGgered Function: The command ena
RIGOL Programming Guide for DM3058/DM3058E 3-61 Explanations: :TRIGger:VMComplete:POLAr? – Queries the current VMC output polar, the default is POS
RIGOL Programming Guide for DM3058/DM3058E 3-62 :UTILity Commands The commands set the communication parameters. Please make sure that communi
RIGOL Programming Guide for DM3058/DM3058E 3-63 1. :UTILity:INTErface:LAN:DHCP Command Format: :UTILity:INTErface:LAN:DHCP? :UTILity:INTErface:LAN:D
RIGOL Programming Guide for DM3058/DM3058E 3-64 :UTILity:INTErface:LAN:MANUip? :UTILity:INTErface:LAN:MANUip {ON|OFF|1|0} Function: The command
RIGOL Programming Guide for DM3058/DM3058E 1-4 Parameter Types 1. Consecutive Integer Parameter The parameters could be an integer within the va
RIGOL Programming Guide for DM3058/DM3058E 3-65 5. :UTILity:INTErface:LAN:MASK Command Format: :UTILity:INTErface:LAN:MASK? :UTILity:INTErface:LAN:MA
RIGOL Programming Guide for DM3058/DM3058E 3-66 Return Format: The query returns the current gateway. 7. :UTILity:INTErface:LAN:DNS Command
RIGOL Programming Guide for DM3058/DM3058E 3-67 <value> Consecutive Integer 0~30 7 Explanations: :UTILity:INTErface:GPIB:ADDRess? – Queries th
RIGOL Programming Guide for DM3058/DM3058E 3-68 Function: The commands query and set the parity bit. Explanations: :UTILity:INTErface:RS232:PARIt
RIGOL Programming Guide for DM3058 4-1 Chapter 4 Compatible Agilent Commands In ths commands system, a
RIGOL Programming Guide for DM3058/DM3058E 4-2 CALCulate Commands The commands set the calculation operations, which mainly include: CALCulat
RIGOL Programming Guide for DM3058/DM3058E 4-3 1. CALCulate:FUNCtion Command Format: CALCulate:FUNCtion {NU
RIGOL Programming Guide for DM3058/DM3058E 4-4 Explanations: CALCulate:STATe {OFF|ON} - Sets the desired calculation state. CALCulate:STATe? - Que
RIGOL Programming Guide for DM3058/DM3058E 4-5 CALCulate:LIMit:UPPer {<value>|MINimum|MAXimum} CALCula
RIGOL Programming Guide for DM3058/DM3058E 4-6 Explanations: The command is valid only when the dB function (CALCulate:FUNCtion DB) is enabled und
Kommentare zu diesen Handbüchern