Rigol DM3058 Spezifikationen PDF herunterladen (Seite 252)

RIGOL

Programming Guide for DM3058

7-14

The programming steps——Agilent Commands:

0 *CLS /*Clear the instrument state*/

1 cmdset□agilent /*Select Agilent commands*/

2 *IDN? /*Query equipment ID to confirm if the instrument

works normally*/

3 /*Connect the test leads under resistance measurement mode*/

4 conf:res□20000,2 /*Enable resistance measuring function, set

range as 20 kΩ, measuring rate as medium*/

5 calc:stat□on /*Enable math operation function*/

6 calc:func□aver /*Enable average calculation function*/

7 *sav□1 /*Store current state to storage area 1*/

8 calc:stat□off /*Exit math operation function*/

9 conf□20,max /*Enable DC voltage measurement function, set

range as 20V, measuring rate as low*/

10 calc:stat□on /*Enable math operation function*/

11 calc:lim:low□<value1> /*Set the lower limit*/

12 calc:lim:upp□<value2> /*Set the upper limit*/

13 calc:func□lim /*Enable limit calculation function*/

14 *sav□2 /*Store current state to storage area 2*/

15 calc:stat□off /*Exit math operation function*/

16 *rcl□1 /*Recall state 1*/

17 *rcl□2 /*Recall state 2*/

Remarks:

1. In line 4 command , input 20000 (unit is Ω), thus the range is set as 20 kΩ. The

second parameter ―2‖ denotes the resolution is 2 Ω. The resolution and the

measuring rate is relevant, so the rate is set as medium.

2. In line 9 command , input 20 (or any real number between 2~20), thus the range

is set as 20V. The second parameter ―max‖ denotes the maximum resolution. The

resolution and the measuring rate are relevant, so the rate is set to low.

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 263 264

Keine Kommentare

Rigol DM3058 Spezifikationen Seite 252